Stump Removal - Burning Out a Stump

· 2 min read
Stump Removal - Burning Out a Stump

After removing a tree many times you will see a stump left and eliminating it can be a tough job.  https://boje-simmons.blogbright.net/the-science-of-stump-removal-projects-1710722373  to get rid of the stump without much effort is to burn it out. Before you proceed there are two things that you should do first.

? When things are dry, it is much easier to burn so if the stump have not yet dried properly you need to wait until it has dried.
? Before you start the burn, call your neighborhood fire department to make sure that you won't be breaking any rules about burning your geographical area. If it is okay to burn, make certain the stump is nowhere near any flammable materials or close to any building.

Stump burning steps

? You will need a chain saw to cut an "X" on the top of the stump. The deeper and wider the X the higher for burning the stump. Fill the area that was just made out of gasoline or kerosene but usually do not light it. You have to give it time and energy to soak into the stump, that may take several hours. After the fuel has soaked in, pour more in your community until it flows over the side and leave it sit overnight.


? Set fire to the stump the next morning by lighting some paper and tossing it along with the trench. To help make the burn up more effective and go faster it is possible to follow the aforementioned paragraph but before you set it burning get yourself a large metal barrel. How  Click here  should be will depend on how large of a stump you must burn. Cut off underneath, the surface of the metal barrel, and place the barrel over the entire stump. Toss in a few log and put even more fuel on the logs so a good fire will start.
? When you are using the barrel for stump removal, devote more logs after the fire is burning good. The barrel helps to keep a high temperature so the stump will burn up more efficiently because it is soaked in fuel. Keep putting in more logs and let it continue to burn before stump removal is finished. If you want to burn it some more the next day, you can cut another X in the stump or drill some holes in, pour more gasoline or kerosene on the stump and set it on fire again.

If the stump removal involves a stump that is deep rooted and really big burning it out might not work so you might hire someone professional to accomplish the stump removal. Make sure that you wear protective gloves to protect the hands from being burned.